Extend KVM (DVI)

The CE600 is a DVI and USB KVM Extender with RS-232 serial functionality. It allows access to a computer system from a remote console (USB keyboard, monitor, and mouse). for use in any type of installation where you need to place the console where it is conveniently accessible, but you want the system equipment to reside in a safe location away from the dust and dirt of the factory floor, or the harsh environmental influence of a construction site, for example.

The CE600 uses one Cat 5e cable (DVI Single Link) to support up to 1920 x 1080 video resolution. A second Cat 5e cable is used for HDCP, RS-232, and microphone signals.

• Local and Remote Units connect at distances up to 60 m using Cat 5e cable
• Features ATEN technology that allows A/V transmission over one cat 5e cable
• Superior video quality of up to 1920 x 1200 @ 60 Hz at 30 m; 1024 x 768 @ 60 Hz at 60 m – get an excellent, crisp image on your screen over long distance transmissions
• Manual compensation control to adjust signal strength in order to compensate for distance

• Pixel-perfect digital video with real time control: using uncompressed video extension; no visible artefacts or latency are introduced allowing you to be certain of quality and control
• Analog audio Stereo CD quality: Stereo channel 16bit sampled at 44.1kHz to transfer audio from local to remote for line out
• Distribution up to 50m over a single CATx cable: video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50m of extension (distance dependent upon video resolution, CATx cable type, and number of connection intervals)
• Connect any USB interface device: utilising a unique method of USB communication, the ADDERLink X-DVIPRO extenders deliver the highest possible levels of USB compatibility. All USB 1.1 and 2.0 low/full speed devices are supported.
• HDMI video and audio extension capabilities: Digital audio for 8 channels of HDMI audio, supported simultaneously to analog audio

Data sheet

ADDERLink X-DVI PRO DL is a high performance Keyboard, Video,and Mouse extender able to transmit a dual link video stream, USB 2.0 and analog audio over a single CATx cable.

• Plug and play
• 50 meter extension distance
• 2560 x 1600 @ 60Hz maximum resolution
• USB 2.0 Low and Full speed
• Keyboard, mouse, tablet and touch screen

Data sheet

The ADDERLink X-DVI PRO-MS is Adder’s second generation extender to transmit two DVI video streams or two HDMI streams, Audio, USB 2.0 and audio over CATx cable.

The ADDERLink X-DVI PRO-MS allows users to extend control of any computer with multiple screen outputs and USB 2.0 over distances up to 50 meters with resolutions up to 165 MPixels per second (e.g. 1920x1200 @ 60Hz or 3840 x 2400 @ 17Hz). In operation, the X-DVI PRO-MS is truly plug and play, capturing full EDID data from the screen ensuring your hardware is always setup to deliver optimal display performance.

Data sheet

• Uses single Cat 5e cable to connect the local and remote units
• Allow access to a computer or KVM installation from a remote console
• Superior Video Quality – up to 1920 x 1200 @ 60 Hz at 100 m
• Anti-jamming - resists signal interference during high-quality video transmissions using HDBaseT technology
• Transparent USB Support – supports all USB 2.0 High Speed device*
• Extends local PC Video/Keyboard/Mouse to Remote side
• Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV)
• USB 2.0 Support*: supports devices such as keyboard, mouse, fl ash drive, printer, microphone, speakers, USB web camera and other USB 1.1 devices which require moderate amounts of bandwidth
* Note: The CE610 supports USB transfer rates of up to 30 Mbps.

£743.02 (£891.62 Including VAT at 20%)  
AWAITING STOCKIN STOCK



Quantity:

The ATEN CE620 USB DVI HDBaseT™ 2.0 KVM Extender integrates the latest HDBaseT™ 2.0 technologies to provide the most reliable transmission of video, audio, USB and RS-232 signals available on the market. The CE620 delivers high-quality DVI video, PCM 2-channel digital audio, USB 2.0 and RS-232 signals up to 100 meters from the source computer using a single Cat5e/6 cable.

• HDBaseT™ 2.0 connectivity technology
  • Extends video, audio, USB and RS-232 signals via a single Ethernet cable
  • EDID Buffer for smooth power-up and the highest quality display
  • Enhanced bit error detection and correction to resist signal interference during high-quality video transmissions
• Long distance superior video quality
  • HDBaseT™ Standard mode up to 1920 x 1200 @ 100 m
  • HDBaseT™ Long Reach mode up to 1920 x 1080 @ 150 m
• Long Reach mode switch — switches between HDBaseT™ Standard and Long Reach modes in a snap
• Integrated USB 2.0 ports — ensuring fast transmission speeds for peripherals Supports 2-channel PCM digital audio — ensuring highquality audio transmissions

The CE604 is a DVI Dual View USB KVM Extender, with RS-232 serial functionality that allows access to a computer system from a remote console up to 60m away. The CE604 is equipped with RS-232 serial channel for connecting to a serial terminal, or serial devices such as touchscreens and barcode scanners. In addition, it supports advanced PC Wake- Up feature that allows you simply uses a pushbutton from the remote dual view console to wake a PC at the local site. The CE604 eliminates the need for traveling back and forth between the local computer and remote console, effi cient and fl exible.

• Local and Remote Units connect at distances up to 60 m using two Cat 5e cables
• Transmit speaker, keyboard, mouse, DDC and one DVI via one Cat5 cable; RS-232, microphone and another DVI by adding a second Cat 5e cable
• Supports Dual View video source transmission (one PC with two video output ports)
• Audio Enabled - supports stereo speakers and microphone
• Supports Real DDC bypass and ATEN default EDID technology >set up various confi gurations via hotkeys
• Supports PC wakeup function via one pushbutton or hotkey
• RS-232 serial channel - connect to a serial terminal, or serial devices such as touchscreens and barcode scanners (Baud Rate up to 9600 bps)
• Compatible with other ATEN Dual View KVM devices, such as CS1642A/ CS1644A and CS1762A/CS1764A
• Superior video quality - up to 1920 x 1200 @ 60 Hz at 30 m; 1024 x 768 @ 60 Hz at 60 m
• Manual compensation control to adjust video signal quality in order to compensate for distance
• Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection

Data SheetCE604 Manual

• Perfect digital video, real time control The video extension system is uncompressed, where by every pixel of every frame are sent without loss and in real-time.
• Single CATx extension cableVideo, USB 2.0, audio and RS232 signals all pass along a single CATx extension cable.
• Up to 150 meter extension distance -Distance is dependent on the monitor resolution, cable type and number of connection breaks for patch panels and wall plates.
• The transparent USB 2.0 link supports most common USB devices such as mice, keyboards, touch screens, graphic tablets, jog shuttles, joysticks and mass storage devices. Isochronous devices such as web cams and headsets can also be used.
• Plug and Play - Installation is straightforward and there is no need for extra drivers or software to be installed. Locking power connectors
• Locking 3 Pin DC jack with 2 power adaptors included.
• CD quality analog audio (stereo channel 16 bit sampled at 44.1kHz) is available to transfer stereo audio from local to remote for Line Out.
• The extender has an intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer. A KVM switch mode is also provided for improved compatibility with KVM equipment. The whole system is flash upgradeable from the computer end for future compatibility.
• RS232 can be passed between the units to a maximum baud rate 115K2 via the options port. Adder’s RC4 remote key switch is also supported. Intelligent USB hub
• The remote unit has an in-built 4-port USB hub to enable several USB devices to be connected.

Datasheet

ADDERLink XD150FX is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the original user desktop experience

• Resolutions up to 2560 x 1600 @60Hz
• 4km extension distance for a single mode fiber.
• USB2.0 Hi-speed for mass storage devices
• USB2.0 (Low, Full, High speed) for keyboard, mouse, tablet and touch screen
• Bidirectional analog audio (Line in/out with microphone & headphone support)
• RS232 with RTS/CTS flow control

ADDERLink XD150FX is a high performance KVM (Keyboard, Video, Mouse) extender that enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station whilst maintaining the original user desktop experience

• Resolutions up to 2560 x 1600 @60Hz
• 150m extension distance for OM2 multi-mode fibre.
• USB2.0 Hi-speed for mass storage devices
• USB2.0 (Low, Full, High speed) for keyboard, mouse, tablet and touch screen
• Bidirectional analog audio (Line in/out with microphone & headphone support)
• RS232 with RTS/CTS flow control

• Allows access to a computer or KVM installation from a local / remote console
• Supports DVI-D interface and allows transmission of DVI single-link signals
• Superior video quality of up to 1920 x 1200 @ 60 Hz (24-bits) - get an excellent, crisp image on your screen over long distance transmissions up to 600 m*
• Touchscreen support - connect a generic touchscreen, including devices up to 10-point multi-touch, to accommodate highly interactive applications (no extra drivers needed)
• Dual console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
• Uses one fiber optic cable to connect the local and remote units
• HDCP compatible
• RS-232 serial port - connect to a serial terminal, or serial devices such as barcode scanners (Baud Rate 115200 bps)
• PC Wakeup support - use a pushbutton on a Remote Unit to wake a PC at the local site via RS-232
• Audio Enabled - supports stereo speakers and microphone
• Rack mountable

• Allows access to a computer or KVM installation from a local / remote console
• Supports DVI-D interface and allows transmission of DVI single-link signals
• Superior video quality of up to 1920 x 1200 @ 60 Hz (24-bits) - get an excellent, crisp image on your screen over long distance transmissions up to 20 km*
• Touchscreen support - connect a generic touchscreen, including devices up to 10-point multi-touch, to accommodate highly interactive applications (no extra drivers needed)
• Dual console operation - control your system from both the local and remote USB keyboard, monitor, and mouse consoles
• Uses one fiber optic cable to connect the local and remote units
• HDCP compatible
• RS-232 serial port - connect to a serial terminal, or serial devices such as barcode scanners (Baud Rate 115200 bps)
• PC Wakeup support - use a pushbutton on a Remote Unit to wake a PC at the local site via RS-232
• Audio Enabled - supports stereo speakers and microphone
• Rack mountable

NOTE - This part code (not the product itself) ALIF2020P has been retired by Adder however we have continued to use it for convenience. ALIF2020P was always a combination of two part codes (transmitter & receiver) ALIF2020T+ ALIF2020R and they will from now on be shown separately on any paperwork.

AdderLink Infinity (ALIF) dual 2020 is an IP-based high performance KVM (Keyboard, Video and Mouse) extender that forms part of the ALIF matrix solution. This enables you to locate your critical computing hardware in a secure and temperature controlled environment away from the user work station, whilst maintaining a pixel perfect desktop experience.

Data SheetINFINITY User guide